How to delete from Computer?

Quick guide to remove

“Yesterday, I was surfing online. I found that my system was not functioning normally. I started getting some redirection issues also. I was unable to understand what is going on with my PC so I just turned off my PC. After sometimes, I restarted my system again but at that time, my system was taking lots of time during rebooting. After several tries, I am able to find that browser have automatically installed as default search engine, homepage, etc. I am unable to understand what is happing with PC. Please someone solve my issue. It is really annoying to do my work with such issues.”

What is

According to experts, it is dangerous malware that is classified as browser hijacker. It gets inside your system secretly without your permission. After its infiltration, it starts taking control over your system and modifying as its preferences. It causes redirection issues of browser to suspicious and dangerous sites. It affects your system performance and degrades it. It will also send you numbers of fake messages, notifications, alerts, warnings and so on. It may irritate you by showing number of useless ads, pop ups, offers and so on.

How it cause trouble to you?

After installation, it will alter your home page, URL, control panel and other important applications. It could corrupt or infect important files or genuine applications. It may make your system slow and irresponsive and enlarge your CPU tasks. It could show you numbers of ads, pop ups, offers etc. and irritates you during your online session.

Most importantly, it collects your browsing history, personal details, password, IP address and other important details and provides these details to hackers or third parties. Hackers or third party may use this to control your system or in other illegal activities.

How it spread from one place to other?

It spreads through fake mails or mail attachments and via bundling method of freeware or shareware files. It gets inside your system by infected external devices. By clicking ads, pop ups and other attractive deals you may also end with its installation. It is advised that please try to avoid these intrusion method and be aware of such nasty programs. Please read the instruction manual carefully and choose custom or advance option to filter unwanted files from installation. In worst cases, if your system is infected then please remove with the help of powerful malware removal tool as given below.

Completely remove though SpyHunter 4


  • After installation, as you will run this anti-malware, you will see dashboard. There click on Scan Computer Now option.
  • Now, your Computer is being scan for malwares though SpyHunter 4. You need to wait until Malware scan Completes.
  • After completing malware scan, this anti-malware tool also find some malware its related issues on Computer.
  • There, select all listed issues and detected Malware and click on fix threat option.
  • As shown on picture, anti-malware tool should also start fixing threats on your Computer too.
  • In order to deploy DNS protection, you need to go to DNS section and activate DNS protection.
  • SpyHunter 4 also provides advanced malware protection for your each files located on Computer.
  • In case, your problem still not solved, you can raise support ticket through spyware desk window.

Use Plumbytes Anti-Malware to delete

  • Please download and install Plumbytes anti-malware on
  • After installation completes, Click on ‘Run a scan’ option in dashboard of anti-malware.
  • Now, this anti-malware tool starts running malware scan.
  • As after malware scan completes, detected malware and issues will automatically show on screen.
  • Now, select all detected malware or issues and click on ‘Remove selected’ option. That’s it.
  • This is settings section to make more setting customization on anti-malware according to your convenience.

How to manually fix errors and eliminate from Computer? (Advanced Steps)

In this method, we are showing you method to fix your Computer issues without using any kind of anti-malware tool or third party application. However, before going on that fact, you need to remember one important fact. This manual method is unstable and dangerous for your Operating System if it does not used carefully. This manual method require lot of technical knowledge and effort to perform its steps. Any mistakes in this method can responsible for several error on Operating System. In fact, your Computer screen might shows boot errors. Hence, you are extremely advised to not use this method carelessly. Instead of using this method, you can try out anti-malware tools as provided above to solve your Computer issues.

Essential steps need to take for manually fix your Computer issues:

STEP 1: Check you browser’s unwanted extensions, new tab page, search engine and homepage settings.


  • Open chrome browser and go to Menu >> More Tools >> Extension.
  • Check additional extension application installed on browser and remove it.
  • Afterwards, go to Chrome browser setting and restore your default search engine as previous one.
  • To avoid pop-ups, go to content settings by Menu >> Settings.
  • On Content setting, choose option [DO NOT ALLOW ANY WEBSITE TO SHOW POP-UPS].


  • Open up Firefox browser and click on “Firefox” button present on the top-left corner.
  • Click on add-ons options>> Extension tab.
  • Here you will find all the extensions that are install.
  • Choose the malicious extension that installed without your permission and uninstall it.
  • To take effect of your changes, please restart the browser.


  • Open I.E browser on PC.
  • Click on Tool or Gear icon >> Manages add-ons option.
  • Extension window will be appears on the screen, now detect the malicious and unwanted extensions and disable it.
  • Restart the browser.


  • Open up EDGE browser and go to Menu >> Extensions where all installed extensions are listed.
  • Select unrecognized or unwanted extension and click on uninstall button.
  • Afterwards, a confirmation message will ask you to delete extension permanently, click OK.
  • Now, go to Menu >> Settings and click on Advanced settings and activate block pop-ups options.
  • Now, restart EDGE browser to take effects.


  • Open up safari browser and select the “Safari” dropdown menu.
  • Click the “Preferences” button. This action will launch a new menu.
  • Now, select Extension tab.
  • Here, you can manage all your installed extension. Please check malicious extensions and uninstall it.
  • Restart your browser in order to load your settings effects.

STEP 2: How reboot Computer into safe mode and uninstall unwanted application?

  • Restart your device into safe mode by rapidly clicking on F8 keyboard button.
  • Boot screen automatically shows up, please select ‘Safe Mode’ option.
  • Now, click WIN+R key and type [CONTROL PANEL] to open control panel settings.
  • From there, go to ‘Program and Features’ option.
  • Now, you will see list of applications that have installed on Computer, on there you need to detect unwanted application and uninstall it.
Click Here To Download SpyHunter 4

STEP 3: How to delete and its suspicious registry keys from registry settings.

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders]
Startup="C:\windows\start menu\programs\startup"
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders]
Startup="C:\windows\start menu\programs\startup"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\explorer\User Shell Folders]
"Common Startup"="C:\windows\start menu\programs\startup"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\explorer\Shell Folders]
"Common Startup"="C:\windows\start menu\programs\startup"
"Whatever"="c:\runfolder\[Malware Name]"
"Whatever"="c:\runfolder\[Malware Name]"
"Whatever"="c:\runfolder\[Malware Name]"
"Whatever"="c:\runfolder\[Malware Name]"
"Whatever"="c:\runfolder\[Malware Name]"
"Whatever"="c:\runfolder\[Malware Name]"
"Whatever"="c:\runfolder\[Malware Name]"
[HKEY_CLASSES_ROOT\exefile\shell\open\command] @="\"%1\" %*"
[HKEY_CLASSES_ROOT\comfile\shell\open\command] @="\"%1\" %*"
[HKEY_CLASSES_ROOT\batfile\shell\open\command] @="\"%1\" %*"
[HKEY_CLASSES_ROOT\htafile\Shell\Open\Command] @="\"%1\" %*"
[HKEY_CLASSES_ROOT\piffile\shell\open\command] @="\"%1\" %*"
[HKEY_LOCAL_MACHINE\Software\CLASSES\batfile\shell\open\command] @="\"%1\" %*"
[HKEY_LOCAL_MACHINE\Software\CLASSES\comfile\shell\open\command] @="\"%1\" %*"
[HKEY_LOCAL_MACHINE\Software\CLASSES\exefile\shell\open\command] @="\"%1\" %*"
[HKEY_LOCAL_MACHINE\Software\CLASSES\htafile\Shell\Open\Command] @="\"%1\" %*"
[HKEY_LOCAL_MACHINE\Software\CLASSES\piffile\shell\open\command] @="\"%1\" %*"

Click Here To Download SpyHunter 4

STEP 4: Restore your DNS Configuration settings to unblock and fix slow Internet.

For Windows 8/8.1/10 users:

  • Right click on the Windows icon located on the left below of the screen.
  • Click on control panel options and then double click on Network Connection.
  • Please right click on the active connection.
  • Then, click on properties option.

For Windows Vista/XP/7 users:

  • Click on Windows Start menu.
  • Go to Control Panel Option.
  • Click on Network and Sharing Center.
  • Then Click on your Connection Type (Local Area Connection).
  • Click on Properties Button, it will take you to a new window.
  • Click on Internet Protocol (TCP/IP).
  • Click on Properties button.
  • Make sure that you have Obtain IP address automatically and Option DNS server automatically selected. This would let your machine acquire the settings straight from your modem/router.

Now, change the DNS server setting to default:

  • Click on Start menu>>Control Panel>> Network and Sharing Center or Network Option.

dns reset1

  • Click “Change Adapter Settings” in the left bar.

dns reset2

  • Right click on your network device and choose properties. In my case this was Local Area Connection, but it could also be a wireless adapter or named something else.

dns reset3

  • Choose the IP version you would like to set the DNS settings for and click “properties”. I will be choosing IPv4 for this guide, but the steps are basically identical for IPv6.

dns reset4

  • In the window that pops up, click “Advanced” in the bottom right of the windows.

dns reset5

  • Click the “DNS” tab at the top.

dns reset6

  • Click Add and then type a “Tier2 server IP” in the box that pops up and click add again.

dns reset7 (“Tier Server IP” addresses are local IPs which located according to your area. For further information about your nearest area IP, you can visit to

Note: You can repeat above step as many times as you want to add more DNS servers IP. DNS servers added to the list are being tried consecutively after a short timeout when one or more of them are offline.